Pro Series Connections & Accessories
Front Mount Direct Connect to Wave Dock
Designed specifically for the Pontoon Port and Pro Port Series, this one piece receiving bracket slides directly into the H-Beam channel of the Wave Armor dock section, making it the easiest and fastest mounting connection on the market.
- Allows for hinged like movement during wave action.
- Hardware included
Requires 2 Kits per installation for Pro Pontoon Port and only 1 Kit per installation for the Pro PWC Port.
Front Mount to Floating Dock
This heavy duty poly bracket is designed specifically for the Pontoon Port and Pro Port Series creating a receiver that attaches to the galvanized C-channel on one side and connected with a pin to the port front mounting pocket. Designed for securing to any floating dock structure.
Hardware Included
Requires 2 Kits per installation for Pro Pontoon Port and only 1 Kit per installation for the Pro PWC Port.
Pro Port to Port Connector Kit
This 2-piece port to port connector was designed specifically for PRO ports series and allows to connect side-by-side 2 or more ports adding more stability and walking surface between the ports. Recommended for multiple port installation such as jet ski rentals, marinas and resorts.
- Rotomolded construction
- Improved design for easier installation.
- Hardware included.
- Flagstone pattern and color to match port.
- Includes: 2 sets of connectors and hardware.
Extension Deck with Connection Kit
• Rotomolded construction.
• Compatible with PRO series and Pro Maxx series ports.
• Multiway use for custom layouts.
• Port-to-Port connector included.
Kit includes: 1 Corner and 1 pack( set of 2) Port-to-Port Connectors. Note: Please, cover all unused mounting openings with PRO Cap to avoid injury.
Side Connection Kit to Floating Dock
Side Connection Kit to Wave Dock
Side Extension Deck with Connection Kit
Recommended for narrow dock layouts or to add extra space around jets ports.
• Rotomolded construction.
• Compatible with PRO series and Pro Maxx series ports.
• Multiway use for custom layouts.
• Port-to-Port connector included.
Kit includes: 1 Side Wing and 1 pack( set of 2) Port-to-Port Connectors. Note: Please, cover all unused mounting openings with PRO Cap to avoid injury.
Bolt-In Cap
Cover unused pipe mounting holes with this bolt on cap designed specifically fro PRO Series Ports.
- Bolt-On design
- Rigid rotomolded contruction
- Pattern and color matches to the port
Pipe Sleeve
Designed specifically for PRO port series these pipe sleeves accommodate 2” and 3″ pipes.
- Quick and easy “drop-in” installation utilizing mounting pipe holes in all 4 corners of the PRO port. Secured with ⅜ stainless steel hardware.
- Simple installation.
- Rigid Rotomolded construction.
- “Bolt-on” design.
- Hardware provided.
- Includes: 2 pipe sleeves, hardware.
SLX Series Connections & Accessories
Port to Wave Dock Flex Connection Kit
A combination of 2 heavy duty poly brackets attached to receiving bracket that slides in to the H-Beam channel for simple install.
- Allows for hinged like movement during wave action
- Hardware Included
Telescoping Port to Fixed Dock Kit or Sea Wall
Fastened to fixed dock the telescoping bracket adjusts horizontally 16″ – 24″ allowing space between dock and port. Pipes secure to these brackets with u-bolts and feed through poly sleeves allowing the port to move freely in fluctuating water levels.
INCLUDES:
- 2-adjustable aluminum brackets
- 2-u-bolts and hardware
REQUIRES:
- 2″ or 4″ pipe sleeves, sold separately.
SLX™ to Floating Dock Kit
SLX Floating Pin / C-Channel connection system allows you to connect SLX5 and SLX6 PWC Ports to most floating docks utilizing the SLX mounting pockets.
Available Kit Sizes:
19 3/4 Inch Channel Length Kit
25 3/4 Inch Channel Length Kit
Kit Includes: 2 Poly Floating Pin Attachments and 2 Galvanized Steel C-Channels.
Note: (Docks with a higher freeboard should utilize the 25 3/4″ Channel Length Kit
Port to Fixed Dock Kit
Secures your PWC Ports to a fixed dock or sea wall utilizing galvanized steel Z-brackets and U-bolts. Pipes required for installation (not included or sold by Wave Armor).
Available Kit Sizes:
2-Inch Pipe Kit
4-Inch Pipe Kit
Fits: Apex 5, Apex 6, SLX5, SLX6, and Apex SPORT
Kit Includes: 2 Z-Brackets and 4 U-Bolts
2″ SQUARE PIPE SLEEVE KIT
Designed to perfectly fit into ressest pipe mounting holes in all 4 corners of the SLX and Apex port models ( Evo Sport not compatible), this pipe sleeve features square design that creates a flush surface with the port and accommodates 2” pipes for port installation.
- Rigid rotomolded construction.
- Bolt-on design.
- Flush with the port surface.
- Hardware provided.
Includes: 2 2” inch pipe sleeves and hardware.
Wheel Kit
Additional wheel for your Wave Port SLX 5 and SLX 6 ports manufactured before Fall 2021.
Includes:
- 1 Wheel
- 1 Axle
- 2 Spacers (Qty 1)
Port to Port Kit
Double your fun and connect a pair or multiple PWC Ports together utilizing our innovative poly connecting pin system. Pins are placed in the adjacent mounting pockets of your Ports for a secure and rugged hold.
Kit Includes: Two Pin Systems
Port Side Extension
Attaches to either side of PWC Wave Port utilizing poly connecting pins placed in the unused mounting pockets.
Increases the overall width of the Port by 22 inches.
Includes: 1 Side Extension, 2 Poly Connecting Pins
Port Snap-In Cap
The Port Snap-In Cap is available to cover unused mounting pockets in your PWC Port, creating a clean, finished look and a flush surface to walk on!
Includes: 2 Snap-In Caps
Port Buoyancy Booster
The Port Buoyancy Booster kit features custom drums that install in the rear mounting pockets of your PWC Port.
Adds additional flotation to the rear of the Port, thus decreasing the rearward pitch for heavier personal water crafts.
Kit Includes: 2 Custom Drums
Stainless Steel Chain & Clip
Secure your PWC to your port with our Stainless Steel Chain & Clip.
- Comes standard on all APEX and APEX Sport PWC Ports Can be added to SLX PWC Ports.
- Chain attaches underneath SLX bow stop with bolt included. See images for example.
Pipe Sleeves-Raised
This 2″ Raised Pipe Sleeve fits inside the mounting pockets of the PWC Ports. Increases the stability of the Port by extending the plane in which the insert comes into contact with the 2″ post.
Available Sleeve Size:
2-Inch Sleeves
Includes: 2 Pipe Sleeves
Pipe Sleeves-Flush
Oversized Pipe Sleeves fit inside the mounting pockets of the PWC Ports, allowing the Port to easily slide up and down dock posts in varying water levels.
Available Sleeve Sizes:
3-Inch Sleeves
4-Inch Sleeves
Includes: 2 Pipe Sleeves
SLX™ Post Extension Kit
This Kit mounts directly inside the mounting pockets of SLX5 or SLX6 PWC Ports. Extends the outside edge of the Port, increasing the distance between two posts allowing more room for larger sized PWC’s.
Available Kit Sizes:
2-Inch Post Kit
4-Inch Post Kit
Extreme X24 Connectors & Accessories
Extremes to Wave Dock Kit
The Extreme-to-Wave Dock Kit allows you to connect our Extreme Boat Port to the Wave Dock System utilizing poly direct connects with receiver brackets that slide directly into the H-Beam Channel on the Wave Dock System. This kit allows you to connect the Extreme Boat Port as close to the dock as possible for a safer, more seamless look.
2 Poly Direct Connects with Receiver Brackets.
Extreme to Floating Dock Kit
The Extreme Boat Port to Floating Dock Kit connects the Extreme Boat Port to any floating dock while keeping the boat port close to the dock. The system features two part heavy-duty poly bracket creating a robust connection receiver that attaches to aluminum c-channels mounted on the floating dock structure.
Includes:
- Two (2) Direct Connect Brackets and two (2) Aluminum Brackets.
Extreme 8″ Pylon Hoop Attachment Kit
This heavy duty rotomolded Pylon attachment kit is constructed of tough polyethylene, providing a secure connection of Extreme Boat Ports to pylons.
Utilizes pylons from 8″ to 12″ in diameter.
Its special design can be attached to both new and existing pylons.
Includes: One Pylon Hoop and Hardware
Extreme 12″ Pylon Hoop Attachment Kit
This heavy duty rotomolded Pylon attachment kit is constructed of tough polyethylene, providing a secure connection of Extreme Boat Ports to pylons.
Utilizes pylons from 8″ to 12″ in diameter.
Its special design can be attached to both new and existing pylons.
Recommended for rough waters and marina installation.
Includes: One Pylon Hoop and Hardware
Extreme 2″ Pipe Anchoring Kit
This bracket allows the boat port to be free standing and self-adjusting for fluctuating water levels.
Extreme 3″ Pipe Anchoring Kit
Heavy duty version of standard post attachment allows the boat port to be free standing and self-adjusting to fluctuating water levels in rougher water conditions.
Includes:
- 2 brackets to mount 2 poles
- Hardware for assembly
Extreme Front Plug Kit
Replaceable plug kit. Fill in unused mounting pockets for clean, finished look and a flush walking surface.
Includes: 2 Plugs and Hardware
Extreme Pipe Sleeve
Includes: 2 Pipe Sleeves and Hardware
Pro 8 & Pontoon Connectors & Accessories
Side Extension Deck
Additional 10″ side extension decks allow you to expand the width for more walkaround room while increasing the capacity. Compatible with the Pro 8 and Pontoon Ports.
Buoyancy Booster (Qty 2)
Designed specifically for the Pontoon Port this buoyancy booster provides an extra 250 lbs. of floatation per booster.
The booster can be installed along the perimeter of the Pontoon Port in multiple molded-in underside pockets, even after full port installation is completed
No tools or hardware needed for the installation
- Provides an extra 250
Front Post Attachment Kit
These front pipe mounts are designed to used when slip width is limited or when a parallel installation to an existing dock is required. These front mounts utilize the Pro Port pipe sleeves and are available in 2 and 3inch diameters. For additional installation strength the Z Bracket kits or adjustable fixed dock mounts are the perfect add on.
- Rotomolded construction.
- Requires pipe sleeves of appropriate size for installation.
- Hardware provided.
- Can be used in combination with other brackets.
Pipe Side Anchoring Kit
This anchoring kit allows the Pontoon Port to be installed as a stand alone unit utilizing pipe mount type of installation or inside of a boat slip without mounting directly to a dock. It can be also used to mount the Pontoon Port to the seawall in combination with other brackets. This 2” pipe bracket is designed to attach over any of the molded-in (horseshoe shaped) pockets located along the perimeter of the Pontoon Port.
- Rotomolded construction
- Hardware included
- Includes: 2 Brackets, hardware
Raised Pipe Mount to Fixed Dock Kit
This heavy duty aluminum L-bracket kit allows you to mount the boat port or pontoon port to a low profile fixed dock (non-floating), yet allows the boat port to rise up and down with the changing water levels.
Includes: Qty 2 brackets and hardware
Note: Pipe Sleeves Required (Sold Separately).
Front Mount Direct Connect to Wave Dock Kit
Designed specifically for the Pontoon Port and Pro Port Series, this one piece receiving bracket slides directly into the H-Beam channel of the Wave Armor dock section, making it the easiest and fastest mounting connection on the market.
- Allows for hinged like movement during wave action.
- Hardware included
Requires 2 Kits per installation for Pro Pontoon Port and only 1 Kit per installation for the Pro PWC Port.
Front Mount to Floating Dock Kit
This heavy duty poly bracket is designed specifically for the Pontoon Port and Pro Port Series creating a receiver that attaches to the galvanized C-channel on one side and connected with a pin to the port front mounting pocket. Designed for securing to any floating dock structure.
Hardware Included
Requires 2 Kits per installation for Pro Pontoon Port and only 1 Kit per installation for the Pro PWC Port.
Bow Stop
Designed for the Pontoon Port, this Bow Stop easily slides on the aluminum rail for additional adjustment to fit your specific pontoon length.
- Rotomolded construction.
- Adjustable design.
- Red color for higher visibility.
- Hardware included.
Left Entrance Guide
Pontoon Port Entrance Guides are self centering guides that provide smooth continuous transition from water to the rollers during loading process on to the Pontoon Port.
Features:
- Rotomolded construction.
- Red color for high visibility.
- Self centering design.
Pontoon Replacement Wheel Kit
Designed specifically for the Pontoon Port, this bow-tie shaped wheel kit features a durable center roller and two innovatively designed outside rollers that provide cushioning protection and precision self-alignment during the loading and unloading process.
- Stainless steel axle.
- Exclusive soft overlay material.
- Self-centering design.
Right Entrance Guide
Pontoon Port Entrance Guides are self centering guides that provide smooth continuous transition from water to the rollers during loading process on to the Pontoon Port.
Features:
- Rotomolded construction.
- Red color for high visibility.
- Self centering design.